Development of roads- ROMAN ROAD

ROMAN ROADS


Firstly roman started constructions of roads in large scale. In 312 BC they constructed way of length over 580 km.

Main features of roman road are:

* They were build straight regardless of gradients.
* Total thickness of the construction was as high as 0.75 m to 1.2 m.
* They were build after the soft soil was removed and a hard stratum was reached.
* The wearing course consisted of dressed large stone blocks set in lime mortar.

Location: Chokhala, tehri garhwal, Uttarakhand 249001, India

Comments

Post a Comment

Popular posts from this blog

Development of roads - TRESAGUET CONSTRUCTION

Image
TRESAGUET CONSTRUCTION Pierre tresaguet developed an improved method of construction in France during 1764 A.D. Main features of Tresaguet construction are: * Thickness of the road was order of 30 cm. * Consideration was given to sub-grade moisture condition and drainage of surface water. * The top wearing course was made up of smaller slope having a cross slope of 1 in 45 to the surface to provide surface drainage. * Shoulder sloping was also provided of the order of 1 in 20 to drain the surface water to the side drain.
Read more

Development of roads - TELFORD CONSTRUCTION

Image
TELFORD CONSTRUCTION His work started in early 19th century in England. Main features of Telford construction are: * He proposed a level sub-grade of width 9 m. * Thickness of foundation stone varied from 17 cm to edges to 22 cm at the centre. * A binding layer of wearing course 4 cm thick was provided with cross slope of 1 in 45. * The central of 5.5 m width was covered with two layers of angular broken stones to compacted thickness of 10 cm and 5 cm.
Read more

Development of roads - METCALF CONSTRUCTIONS

METCALF CONSTRUCTION           John Metcalf (1717-1810) was the first of the great road builders during the transport Revolution. He was a remarkable man, who had been blind since the age of six, but went on to build about 300 km of turnpike road mainly in Lancashire, Derbyshire, Cheshire and Yorkshire, in the period of 1765-1792.           Metcalf believed that a good road should have good Foundation, be well drained and have a smooth convex (rounded) surface to allow rainwater to drain quickly into ditches at the side of the road. Metcalf established his reputation as a road builder, particularly, by building a good dry Road across Marshland. Other engineers through it could not be done but Metcalf accomplished the task by first making a foundation of Brushwood and heather. He showed the importance of good drainage, since it was rain which caused most of the problem on the roads. During the time that Metcalf was working his road needed to repair and could be used for several ye
Read more